These Wallet Closures are the bars that sit on the top edges of wallets & purses. You put the back on one side and the front (with hole) on the other and pull them together to close your wallet up tight. The flip part clicks in place nicely for security. They are prepackaged and come with 10 screws (8 are needed, 2 are extra). Each bar has protective plastic that needs to be removed during installation.

7-1/2 wide, Brushed Antique Brass Colour.

1 Wallet Closure per purchase.

This wallet closure works great for several wallet patterns that are sold by pattern designers, such as theDiva Wallet,Rozy Wallet,Accordi-Anna Wallet.

Instructions: Follow the directions in your particular pattern ORSlide the channels down on to the finished edges of your completed wallet to test fit. Mark holes and if using heavy fabric, poke holes with an awl to allow the screws to enter easily. You will need to cut the opening for the clasp and if desired finish those edges by doing a quick hand or machine basting stitch around them, zig-zag or over cast stitch. Use a small amount of glue in each channel, slide on and insert screws with a mini phillips head screwdriver.